NASAL SPLINT
The Nasal Airway Splint is designed to provide septal support and allow nasal breathing post-operatively through the integral airway. The flexible splints can be sutured through the preformed holes in the anterior tips for stabilization. Material is clear medical-grade silicone.
Sterilization of the Product
Before the first use of the medical device, follow the instructions below in order.
1-) Put the product in its box. Fill the box with approximately 10 ml of water up to the step section on the middle wall of the box.
2-) Close the lid of the box and put the device in the microwave oven. Set the power to a value between 750-1000-Watt. Set the time setting to 3 minutes.
3-) Wait at least 5 minutes for the box to cool down.
*If you do not have a microwave oven, you can also do this by exposing the device with its box to UV light or keeping it in boiled water. If you do not have access to any of these, wipe the device cleanly using the Alcohol Swab (wet wipes containing high alcohol content), which is supplied to you with the device in the cardboard box of the product.
The product here prohibits the following acts.
Refrain from exposing Ultraviolet Ray for long time
1 \ Intended Use
İt use for provide septal support and reduce or prevent adhesions between the septum and lateral nasal wall following surgery.
-
Its made from medical grade slicone
-
Integral airway to allow nasal breathing
-
Includes suture holes
2 \ Suplide
Sterile (right and left, two pairs are placed in a single sterile bag as in the image.)
For single use (It stays in the human body for an average of one week, less than 30 days.)
